Gecko [ www.vortexaion.com ]

Name	Size	Permission	Date
SOAPsh.bat	3.35 KB	-rwxrwxrwx	2021-01-24 18:08
SOAPsh.pl	2.75 KB	-rw-rw-rw-	2021-01-24 18:01
bdf2gdfont.bat	5.26 KB	-rwxrwxrwx	2021-01-24 18:08
bdf2gdfont.pl	4.75 KB	-rw-rw-rw-	2021-01-24 17:46
chartex	5.67 KB	-rw-rw-rw-	2021-01-24 18:01
chartex.bat	6.47 KB	-rwxrwxrwx	2021-01-24 18:08
config_data	7.2 KB	-rw-rw-rw-	2021-01-24 18:01
config_data.bat	7.73 KB	-rwxrwxrwx	2024-07-26 17:42
corelist.bat	15.75 KB	-rwxrwxrwx	2023-11-19 11:41
cpan	8.06 KB	-rw-rw-rw-	2021-01-24 18:01
cpan-mirrors	4.18 KB	-rw-rw-rw-	2021-01-24 18:01
cpan-mirrors.bat	5.1 KB	-rwxrwxrwx	2021-01-24 18:08
cpan-outdated	8.85 KB	-rw-rw-rw-	2021-01-24 18:01
cpan-outdated.bat	9.67 KB	-rwxrwxrwx	2021-01-24 18:08
cpan.bat	9.16 KB	-rwxrwxrwx	2021-01-24 18:08
cpan2dist	21.22 KB	-rw-rw-rw-	2021-01-24 18:01
cpan2dist.bat	22.39 KB	-rwxrwxrwx	2021-01-24 18:08
cpandb	6.6 KB	-rw-rw-rw-	2021-01-24 18:01
cpandb.bat	7.37 KB	-rwxrwxrwx	2021-01-24 18:08
cpanel_json_xs	9.75 KB	-rw-rw-rw-	2021-01-24 18:01
cpanel_json_xs.bat	10.58 KB	-rwxrwxrwx	2021-01-24 18:08
cpanfile-dump	3.45 KB	-rw-rw-rw-	2021-01-24 16:20
cpanfile-dump.bat	4.08 KB	-rwxrwxrwx	2021-01-24 18:08
cpanm	295.67 KB	-rw-rw-rw-	2021-01-24 16:36
cpanm.bat	297.23 KB	-rwxrwxrwx	2021-01-24 18:08
cpanp	3.22 KB	-rw-rw-rw-	2021-01-24 18:01
cpanp-run-perl	459 B	-rw-rw-rw-	2021-01-24 16:38
cpanp-run-perl.bat	990 B	-rwxrwxrwx	2021-01-24 18:08
cpanp.bat	3.84 KB	-rwxrwxrwx	2021-01-24 18:08
crc32	1.01 KB	-rw-rw-rw-	2021-01-24 18:01
crc32.bat	1.57 KB	-rwxrwxrwx	2021-01-24 18:08
dbicadmin	7 KB	-rw-rw-rw-	2021-01-24 18:01
dbicadmin.bat	7.87 KB	-rwxrwxrwx	2021-01-24 18:08
dbilogstrip	1.39 KB	-rw-rw-rw-	2021-01-24 17:15
dbilogstrip.bat	1.89 KB	-rwxrwxrwx	2021-01-24 18:08
dbiprof	6.31 KB	-rw-rw-rw-	2021-01-24 17:15
dbiprof.bat	6.82 KB	-rwxrwxrwx	2021-01-24 18:08
dbiproxy	5.44 KB	-rw-rw-rw-	2021-01-24 17:15
dbiproxy.bat	5.95 KB	-rwxrwxrwx	2021-01-24 18:08
enc2xs	40.68 KB	-rw-rw-rw-	2021-01-24 18:01
enc2xs.bat	42.87 KB	-rwxrwxrwx	2021-01-24 18:08
encguess	2.91 KB	-rw-rw-rw-	2021-01-24 18:01
encguess.bat	3.8 KB	-rwxrwxrwx	2021-01-24 18:08
exe_update.bat	4.71 KB	-rwxrwxrwx	2021-01-24 18:08
exe_update.pl	4.05 KB	-rw-rw-rw-	2021-01-24 18:01
exetype.bat	3.53 KB	-rwxrwxrwx	2021-01-24 18:08
extract_vba	2.98 KB	-rw-rw-rw-	2021-01-24 18:01
extract_vba.bat	3.62 KB	-rwxrwxrwx	2021-01-24 18:08
factor.bat	3.77 KB	-rwxrwxrwx	2021-01-24 18:08
factor.pl	3.16 KB	-rw-rw-rw-	2021-01-24 18:01
findrule	3.24 KB	-rw-rw-rw-	2021-01-24 16:52
findrule.bat	3.88 KB	-rwxrwxrwx	2021-01-24 18:08
h2ph.bat	30.27 KB	-rwxrwxrwx	2024-07-26 17:42
h2xs.bat	62.43 KB	-rwxrwxrwx	2024-07-26 17:42
htmltree	1.28 KB	-rw-rw-rw-	2021-01-24 18:01
htmltree.bat	1.81 KB	-rwxrwxrwx	2024-07-26 17:42
hypnotoad	1.03 KB	-rw-rw-rw-	2021-01-24 16:59
hypnotoad.bat	1.58 KB	-rwxrwxrwx	2021-01-24 18:08
instmodsh	4.09 KB	-rw-rw-rw-	2021-01-24 18:01
instmodsh.bat	5.03 KB	-rwxrwxrwx	2021-01-24 18:08
json_pp	4.77 KB	-rw-rw-rw-	2021-01-24 18:01
json_pp.bat	5.52 KB	-rwxrwxrwx	2024-07-26 17:42
json_xs	6.84 KB	-rw-rw-rw-	2021-01-24 18:01
json_xs.bat	7.6 KB	-rwxrwxrwx	2021-01-24 18:08
kwalitee-metrics	2.34 KB	-rw-rw-rw-	2021-01-24 18:01
kwalitee-metrics.bat	2.96 KB	-rwxrwxrwx	2021-01-24 18:08
libgcc_s_seh-1.dll	74.5 KB	-rw-rw-rw-	2019-03-14 23:36
libnetcfg.bat	16.88 KB	-rwxrwxrwx	2024-07-26 17:42
libstdc++-6.dll	1.36 MB	-rw-rw-rw-	2019-03-14 23:36
libwinpthread-1.dll	51 KB	-rw-rw-rw-	2019-03-14 23:36
llw32helper.bat	4.8 KB	-rwxrwxrwx	2021-01-24 18:08
llw32helper.pl	4.13 KB	-rw-rw-rw-	2021-01-24 17:51
lwp-download	10.04 KB	-rw-rw-rw-	2021-01-24 18:01
lwp-download.bat	10.88 KB	-rwxrwxrwx	2021-01-24 18:08
lwp-dump	2.64 KB	-rw-rw-rw-	2021-01-24 18:01
lwp-dump.bat	3.26 KB	-rwxrwxrwx	2021-01-24 18:08
lwp-mirror	2.35 KB	-rw-rw-rw-	2021-01-24 18:01
lwp-mirror.bat	2.96 KB	-rwxrwxrwx	2021-01-24 18:08
lwp-request	15.81 KB	-rw-rw-rw-	2021-01-24 18:01
lwp-request.bat	16.88 KB	-rwxrwxrwx	2021-01-24 18:08
mech-dump	4.74 KB	-rw-rw-rw-	2021-01-24 18:01
mech-dump.bat	5.44 KB	-rwxrwxrwx	2021-01-24 18:08
minicpan	5.36 KB	-rw-rw-rw-	2021-01-24 18:08
minicpan.bat	6.05 KB	-rwxrwxrwx	2021-01-24 18:08
module-version	2.06 KB	-rw-rw-rw-	2021-01-24 17:51
module-version.bat	2.65 KB	-rwxrwxrwx	2021-01-24 18:08
mojo	408 B	-rw-rw-rw-	2021-01-24 16:59
mojo.bat	953 B	-rwxrwxrwx	2021-01-24 18:08
moose-outdated	427 B	-rw-rw-rw-	2021-01-24 18:01
moose-outdated.bat	977 B	-rwxrwxrwx	2021-01-24 18:08
morbo	2.15 KB	-rw-rw-rw-	2021-01-24 16:59
morbo.bat	2.72 KB	-rwxrwxrwx	2021-01-24 18:08
mymeta-cpanfile	2.7 KB	-rw-rw-rw-	2021-01-24 16:20
mymeta-cpanfile.bat	3.32 KB	-rwxrwxrwx	2021-01-24 18:08
nssm_32.exe	288 KB	-rwxrwxrwx	2021-01-24 16:50
nssm_64.exe	323.5 KB	-rwxrwxrwx	2021-01-24 16:50
package-stash-conflicts	463 B	-rw-rw-rw-	2021-01-24 18:01
package-stash-conflicts.bat	1013 B	-rwxrwxrwx	2021-01-24 18:08
parinstallppd	3.35 KB	-rw-rw-rw-	2021-01-24 18:01
parinstallppd.bat	3.99 KB	-rwxrwxrwx	2021-01-24 18:08
perl.exe	39 KB	-rwxrwxrwx	2021-01-24 16:06
perl5.32.1.exe	39 KB	-rwxrwxrwx	2021-01-24 16:06
perl532.dll	3.26 MB	-rw-rw-rw-	2021-01-24 16:07
perlbug.bat	46.8 KB	-rwxrwxrwx	2024-07-26 17:42
perldoc.bat	1016 B	-rwxrwxrwx	2023-11-19 11:41
perlglob.bat	1.95 KB	-rwxrwxrwx	2021-01-24 18:08
perlglob.exe	17 KB	-rwxrwxrwx	2021-01-24 16:01
perlivp.bat	11.72 KB	-rwxrwxrwx	2024-07-26 17:42
perlthanks.bat	46.8 KB	-rwxrwxrwx	2024-07-26 17:42
perltidy	175.27 KB	-rw-rw-rw-	2021-01-24 18:01
perltidy.bat	180.32 KB	-rwxrwxrwx	2021-01-24 18:08
pgplet	10.37 KB	-rw-rw-rw-	2021-01-24 18:01
pgplet.bat	11.22 KB	-rwxrwxrwx	2021-01-24 18:08
piconv	8.07 KB	-rw-rw-rw-	2021-01-24 18:01
piconv.bat	9.13 KB	-rwxrwxrwx	2021-01-24 18:08
pkg-config	46.94 KB	-rw-rw-rw-	2021-01-24 18:01
pkg-config.bat	49.2 KB	-rwxrwxrwx	2021-01-24 18:08
pl2bat.bat	11.49 KB	-rwxrwxrwx	2021-01-24 18:08
pl2bat.pl	10.4 KB	-rw-rw-rw-	2021-01-24 18:01
pl2pm.bat	5.56 KB	-rwxrwxrwx	2024-07-26 17:42
pler	540 B	-rw-rw-rw-	2021-01-24 18:01
pler.bat	1.07 KB	-rwxrwxrwx	2021-01-24 18:08
pm-uninstall	820 B	-rw-rw-rw-	2021-01-24 18:01
pm-uninstall.bat	1.28 KB	-rwxrwxrwx	2023-11-19 11:41
pod2html.bat	5.02 KB	-rwxrwxrwx	2024-07-26 17:42
pod2latex	10.39 KB	-rw-rw-rw-	2024-07-26 17:42
pod2latex.bat	10.92 KB	-rwxrwxrwx	2024-07-26 17:42
pod2man.bat	15.42 KB	-rwxrwxrwx	2023-11-19 11:41
pod2text.bat	11.29 KB	-rwxrwxrwx	2023-11-19 11:41
pod2usage	4.16 KB	-rw-rw-rw-	2021-01-24 16:27
pod2usage.bat	4.67 KB	-rwxrwxrwx	2021-01-24 18:08
pod_cover	1.37 KB	-rw-rw-rw-	2021-01-24 18:01
pod_cover.bat	1.94 KB	-rwxrwxrwx	2021-01-24 18:08
podchecker	3.7 KB	-rw-rw-rw-	2021-01-24 16:27
podchecker.bat	4.21 KB	-rwxrwxrwx	2021-01-24 18:08
podselect	2.56 KB	-rw-rw-rw-	2021-01-24 16:25
podselect.bat	3.07 KB	-rwxrwxrwx	2021-01-24 18:08
ppd2par	4.64 KB	-rw-rw-rw-	2021-01-24 18:01
ppd2par.bat	5.32 KB	-rwxrwxrwx	2021-01-24 18:08
ppm.bat	35.53 KB	-rwxrwxrwx	2021-01-24 18:08
ppm.pl	33.99 KB	-rw-rw-rw-	2021-01-24 18:01
primes.bat	21.45 KB	-rwxrwxrwx	2021-01-24 18:08
primes.pl	20.34 KB	-rw-rw-rw-	2021-01-24 18:01
prove.bat	14.07 KB	-rwxrwxrwx	2023-11-19 11:41
ptar	3.38 KB	-rw-rw-rw-	2021-01-24 18:01
ptar.bat	4.28 KB	-rwxrwxrwx	2021-01-24 18:08
ptardiff	2.48 KB	-rw-rw-rw-	2021-01-24 18:01
ptardiff.bat	3.35 KB	-rwxrwxrwx	2021-01-24 18:08
ptargrep	4.19 KB	-rw-rw-rw-	2021-01-24 18:01
ptargrep.bat	5.14 KB	-rwxrwxrwx	2021-01-24 18:08
runperl.bat	2.72 KB	-rwxrwxrwx	2021-01-24 18:08
scan-perl-prereqs-nqlite	5.28 KB	-rw-rw-rw-	2021-01-24 16:24
scan-perl-prereqs-nqlite.bat	6 KB	-rwxrwxrwx	2021-01-24 18:08
search.bat	55.83 KB	-rwxrwxrwx	2021-01-24 18:08
shasum.bat	10.48 KB	-rwxrwxrwx	2023-11-19 11:41
splain.bat	20.43 KB	-rwxrwxrwx	2024-07-26 17:42
streamzip	5.45 KB	-rw-rw-rw-	2021-01-24 18:01
streamzip.bat	6.17 KB	-rwxrwxrwx	2021-01-24 18:08
stubmaker.bat	4.01 KB	-rwxrwxrwx	2021-01-24 18:08
stubmaker.pl	3.35 KB	-rw-rw-rw-	2021-01-24 18:01
test-yaml	1017 B	-rw-rw-rw-	2021-01-24 18:01
test-yaml.bat	1.56 KB	-rwxrwxrwx	2021-01-24 18:08
tpage	8.85 KB	-rw-rw-rw-	2021-01-24 18:01
tpage.bat	9.64 KB	-rwxrwxrwx	2021-01-24 18:08
ttree	38.21 KB	-rw-rw-rw-	2021-01-24 18:01
ttree.bat	39.9 KB	-rwxrwxrwx	2021-01-24 18:08
use-devel-checklib	2.7 KB	-rw-rw-rw-	2021-01-24 16:53
use-devel-checklib.bat	3.31 KB	-rwxrwxrwx	2021-01-24 18:08
whirlpoolsum	4.93 KB	-rw-rw-rw-	2021-01-24 18:01
whirlpoolsum.bat	5.67 KB	-rwxrwxrwx	2021-01-24 18:08
wperl.exe	39 KB	-rwxrwxrwx	2021-01-24 16:06
xml_grep	13.32 KB	-rw-rw-rw-	2021-01-24 18:01
xml_grep.bat	14.3 KB	-rwxrwxrwx	2021-01-24 18:08
xml_merge	3.89 KB	-rw-rw-rw-	2021-01-24 18:01
xml_merge.bat	4.55 KB	-rwxrwxrwx	2021-01-24 18:08
xml_pp	7.82 KB	-rw-rw-rw-	2021-01-24 18:01
xml_pp.bat	8.61 KB	-rwxrwxrwx	2021-01-24 18:08
xml_spellcheck	6.34 KB	-rw-rw-rw-	2021-01-24 18:01
xml_spellcheck.bat	7.1 KB	-rwxrwxrwx	2021-01-24 18:08
xml_split	21.13 KB	-rw-rw-rw-	2021-01-24 18:01
xml_split.bat	22.27 KB	-rwxrwxrwx	2021-01-24 18:08
xsubpp.bat	5.78 KB	-rwxrwxrwx	2023-11-19 11:41
zipdetails	56.01 KB	-rw-rw-rw-	2021-01-24 18:01
zipdetails.bat	58.95 KB	-rwxrwxrwx	2021-01-24 18:08

Rename

@rem = '--*-Perl-*--
@set "ErrorLevel="
@if "%OS%" == "Windows_NT" @goto WinNT
@perl -x -S "%0" %1 %2 %3 %4 %5 %6 %7 %8 %9
@set ErrorLevel=%ErrorLevel%
@goto endofperl
:WinNT
@perl -x -S %0 %*
@set ErrorLevel=%ErrorLevel%
@if NOT "%COMSPEC%" == "%SystemRoot%\system32\cmd.exe" @goto endofperl
@if %ErrorLevel% == 9009 @echo You do not have Perl in your PATH.
@goto endofperl
@rem ';
#!C:\xampp\perl\bin\perl.exe 
#line 30
    eval 'exec C:\xampp\perl\bin\perl.exe -S $0 ${1+"$@"}'
	if $running_under_some_shell;

# pod2latex conversion program

use strict;
use Pod::LaTeX;
use Pod::Find qw/ pod_find /;
use Pod::Usage;
use Getopt::Long;
use File::Basename;
use Symbol;

my $VERSION = "1.01";

# return the entire contents of a text file
# whose name is given as argument
sub _get {
    my $fn = shift;
    my $infh = gensym;
    open $infh, $fn
        or die "Could not open file $fn: $!\n";
    local $/;
    return <$infh>;
}

# Read command line arguments

my %options = (
	       "help"   => 0,
	       "man"    => 0,
	       "sections" => [],
	       "full"   => 0,
	       "out"    => undef,
	       "verbose" => 0,
	       "modify" => 0,
	       "h1level" => 1,  # section is equivalent to H1
	       "preamble" => [],
	       "postamble" => [],
	      );
# "prefile" is just like "preamble", but the argument 
# comes from the file named by the argument
$options{"prefile"} = sub { shift; push @{$options{"preamble"}}, _get(shift) };
# the same between "postfile" and "postamble"
$options{"postfile"} = sub { shift; push @{$options{"postamble"}}, _get(shift) };

GetOptions(\%options, 
	   "help",
	   "man",
	   "verbose",
	   "full",
	   "sections=s@",
	   "out=s",
	   "modify",
	   "h1level=i",
	   "preamble=s@",
	   "postamble=s@",
	   "prefile=s", 
	   "postfile=s"
	  ) || pod2usage(2);

pod2usage(1)  if ($options{help});
pod2usage(-verbose => 2)  if ($options{man});

# Read all the files from the command line
my @files = @ARGV;

# Now find which ones are real pods and convert 
# directories to their contents.

# Extract the pods from each arg since some of them might
# be directories
# This is not as efficient as using pod_find to search through
# everything at once but it allows us to preserve the order 
# supplied by the user

my @pods;
foreach my $arg (@files) {
  my %pods = pod_find($arg);
  push(@pods, sort keys %pods);
}

# Abort if nothing to do
if ($#pods == -1) {
  warn "None of the supplied Pod files actually exist\n";
  exit;
}

# Only want to override the preamble and postamble if we have
# been given values.
my %User;
$User{UserPreamble} = join("\n", @{$options{'preamble'}})
  if ($options{preamble} && @{$options{preamble}});
$User{UserPostamble} = join("\n", @{$options{'postamble'}})
  if ($options{postamble} && @{$options{postamble}});

# If $options{'out'} is set we are processing to a single output file
my $multi_documents;
if (exists $options{'out'} && defined $options{'out'}) {
  $multi_documents = 0;
} else {
  $multi_documents = 1;
}

# If the output file is not specified it is assumed that
# a single output file is required per input file using
# a .tex extension rather than any existing extension

if ($multi_documents) {

# Case where we just generate one input per output

foreach my $pod (@pods) {

if (-f $pod) {

my $output = $pod;
      $output = basename($output, '.pm', '.pod','.pl') . '.tex';

# Create a new parser object
      my $parser = new Pod::LaTeX(
				  AddPreamble => $options{'full'},
				  AddPostamble => $options{'full'},
				  MakeIndex => $options{'full'},
				  TableOfContents => $options{'full'},
				  ReplaceNAMEwithSection => $options{'modify'},
				  UniqueLabels => $options{'modify'},
				  Head1Level => $options{'h1level'},
				  LevelNoNum => $options{'h1level'} + 1,
                                  %User,
				 );

# Select sections if supplied
      $parser->select(@{ $options{'sections'}})
	if @{$options{'sections'}};

# Derive the input file from the output file
      $parser->parse_from_file($pod, $output);

print "Written output to $output\n" if $options{'verbose'};

} else {
      warn "File $pod not found\n";
    }

}
} else {

# Case where we want everything to be in a single document

# Need to open the output file ourselves
  my $output = $options{'out'};
  $output .= '.tex' unless $output =~ /\.tex$/;

# Use auto-vivified file handle in perl 5.6
  my $outfh = gensym;
  open ($outfh, ">$output") || die "Could not open output file: $!\n";

# Flag to indicate whether we have converted at least one file
  # indicates how many files have been converted
  my $converted = 0;

# Loop over the input files
  foreach my $pod (@pods) {

if (-f $pod) {

warn "Converting $pod\n" if $options{'verbose'};

# Open the file (need the handle)
      # Use auto-vivified handle in perl 5.6
      my $podfh = gensym;
      open ($podfh, "<$pod") || die "Could not open pod file $pod: $!\n";

# if this is the first file to be converted we may want to add
      # a preamble (controlled by command line option)
      my $preamble = 0;
      $preamble = 1 if ($converted == 0 && $options{'full'});

# if this is the last file to be converted may want to add
      # a postamble (controlled by command line option)
      # relies on a previous pass to check existence of all pods we
      # are converting.
      my $postamble = ( ($converted == $#pods && $options{'full'}) ? 1 : 0 );

# Open parser object
      # May want to start with a preamble for the first one and
      # end with an index for the last
      my $parser = new Pod::LaTeX(
				  MakeIndex => $options{'full'},
				  TableOfContents => $preamble,
				  ReplaceNAMEwithSection => $options{'modify'},
				  UniqueLabels => $options{'modify'},
				  StartWithNewPage => $options{'full'},
				  AddPreamble => $preamble,
				  AddPostamble => $postamble,
				  Head1Level => $options{'h1level'},
				  LevelNoNum => $options{'h1level'} + 1,
                                  %User
				 );

# Store the file name for error messages
      # This is a kluge that breaks the data hiding of the object
      $parser->{_INFILE} = $pod;

# Select sections if supplied
      $parser->select(@{ $options{'sections'}})
	if @{$options{'sections'}};

# Parse it
      $parser->parse_from_filehandle($podfh, $outfh);

# We have converted at least one file
      $converted++;

} else {
      warn "File $pod not found\n";
    }

}

# Should unlink the file if we didn't convert anything!
  # dont check for return status of unlink
  # since there is not a lot to be done if the unlink failed
  # and the program does not rely upon it.
  unlink "$output" unless $converted;

# If verbose
  warn "Converted $converted files\n" if $options{'verbose'};

}

exit;

__END__

=head1 NAME

pod2latex - convert pod documentation to latex format

=head1 SYNOPSIS

pod2latex *.pm

pod2latex -out mytex.tex *.pod

pod2latex -full -sections 'DESCRIPTION|NAME' SomeDir

pod2latex -prefile h.tex -postfile t.tex my.pod

=head1 DESCRIPTION

C<pod2latex> is a program to convert POD format documentation
(L<perlpod>) into latex. It can process multiple input documents at a
time and either generate a latex file per input document or a single
combined output file.

=head1 OPTIONS AND ARGUMENTS

This section describes the supported command line options. Minimum
matching is supported.

=over 4

=item B<-out>

Name of the output file to be used. If there are multiple input pods
it is assumed that the intention is to write all translated output
into a single file. C<.tex> is appended if not present.  If the
argument is not supplied, a single document will be created for each
input file.

=item B<-full>

Creates a complete C<latex> file that can be processed immediately
(unless C<=for/=begin> directives are used that rely on extra packages).
Table of contents and index generation commands are included in the
wrapper C<latex> code.

=item B<-sections>

Specify pod sections to include (or remove if negated) in the
translation.  See L<Pod::Select/"SECTION SPECIFICATIONS"> for the
format to use for I<section-spec>. This option may be given multiple
times on the command line.This is identical to the similar option in
the C<podselect()> command.

=item B<-modify>

This option causes the output C<latex> to be slightly
modified from the input pod such that when a C<=head1 NAME>
is encountered a section is created containing the actual
pod name (rather than B<NAME>) and all subsequent C<=head1>
directives are treated as subsections. This has the advantage
that the description of a module will be in its own section
which is helpful for including module descriptions in documentation.
Also forces C<latex> label and index entries to be prefixed by the
name of the module.

=item B<-h1level>

Specifies the C<latex> section that is equivalent to a C<H1> pod
directive. This is an integer between 0 and 5 with 0 equivalent to a
C<latex> chapter, 1 equivalent to a C<latex> section etc. The default
is 1 (C<H1> equivalent to a latex section).

=item B<-help>

Print a brief help message and exit.

=item B<-man>

Print the manual page and exit.

=item B<-verbose>

Print information messages as each document is processed.

=item B<-preamble>

A user-supplied preamble for the LaTeX code. Multiple values
are supported and appended in order separated by "\n".
See B<-prefile> for reading the preamble from a file.

=item B<-postamble>

A user supplied postamble for the LaTeX code. Multiple values
are supported and appended in order separated by "\n".
See B<-postfile> for reading the postamble from a file.

=item B<-prefile>

A user-supplied preamble for the LaTeX code to be read from the
named file. Multiple values are supported and appended in
order. See B<-preamble>.

=item B<-postfile>

A user-supplied postamble for the LaTeX code to be read from the
named file. Multiple values are supported and appended in
order. See B<-postamble>.

=back

=head1 BUGS

Known bugs are:

=over 4

=item *

Cross references between documents are not resolved when multiple
pod documents are converted into a single output C<latex> file.

=item *

Functions and variables are not automatically recognized
and they will therefore not be marked up in any special way
unless instructed by an explicit pod command.

=back

=head1 SEE ALSO

L<Pod::LaTeX>

=head1 AUTHOR

Tim Jenness E<lt>tjenness@cpan.orgE<gt>

This program is free software; you can redistribute it
and/or modify it under the same terms as Perl itself.

=cut

__END__
:endofperl
@set "ErrorLevel=" & @goto _undefined_label_ 2>NUL || @"%COMSPEC%" /d/c @exit %ErrorLevel%